The OConnor Ultimate 2575D Fluid Head is a fluid head with a Mitchell Ball Base and Tiedown that supports high payload cameras rendering it suitable for cine style shooting.
Lightweight at 22.6 lb (10.4 kg), the fluid head sustains a heavy payload up to 90 lb (40.8 kg) with greater drag. Conveniently located controls (pan and tilt brakes) at camera operator's side (left side) of the platform enable ease of operation and rapid familiarity.
The platform also houses dual scales for counterbalance, and sports 4 handle rosettes that allow left or right hand operation as well as mounting from the front or rear. An intelligently placed, soft handrest enhances the Ultimate 2575D Fluid Head's ergonomic design. You can achieve rapid pan movements owing to the fluid drag system that allows the camera to move from one position to other very quickly and recover without any spring back.
The Mitchell Ball Base provides for high mobility and is secured in place by the Mitchell Tiedown. A single-touch, Euro-style platform release lever allows you to disengage the safety catch and open the lever effortlessly, providing high mobility to deal with location changes in the field.
You can achieve sinusoidal counterbalance and stepless pan and tilt drag using the Ultimate 2575D Fluid Head. A collapsible counterbalance crank handle in tandem with a numerical readout allows for easy counterbalancing of the payload. Setting up the camera system in low-light conditions is simple with the illuminated level bubble.
Added to Cart
Capacity: 309 lbs. (140 kg)
Weight: 29.3 lbs. (13.3 kg) (with Spreader)
Maximum Height: 69.2 in. (175.8 cm)
Minimum Height: 33.6 in. (85.3 cm)
Top Casting: Mitchell
Collapsed Length: 40.4 in. (103 cm)
Collapsed Width: 11.1 in. (28.2 cm)
Spreader (OC-C1222-0015) sold separately
Material: Carbon Fiber
Capacity: 209 lbs. (95 kg)
Weight: 8.8 lbs (4 kg)
Maximum Height: 61.8 in. (157 cm)
Minimum Height: 22 in. (56 cm)
Top Casting: 100mm
Collapsed Length: 29.5 in. (75 cm)
Includes: Mid-Leg spreader, set of 3 adjustable feet
Weight: 18.5 lb
Payload: 309 lb
Height with spreader: 7.9 - 34.6 in
Height with mid-level spreader: N/A
Head fitting: 150mm
Transport length: 23.6 in
The SACHLER TRIPOD is ideal for modern camcorders and video-enabled DSLR cameras. The dual extractible aluminium tripod is an affordable alternative to the Sachtler carbon fibre tripods. The tripod legs are locked with screw caps.
Atlas Balanced Fluid Head
The “Atlas” is a completely new design head,with a patented counterbalance system.
Capable of taking camera‘s up to 50 Kgs (110 lbs) @ 30 cm (12“) above the heads pivotal centre. Operated by a single control knob, from 0 – 100 %. Incorporating the well proven Ronford-Baker fluid system, with 15 stages of fluid control, on pan & tilt. With a zero (free) position. These give unprecedented smoothness & accuracy of control & balance under all situations.
Minimum Height: 3 ft.
Maximum Height: 5' 6"
Weight: 22 lbs
Spreader NOT included